Cisco 12810-SFC Switch Fabric GSR10/800 12810/800 12000/10 SFC-12810 GSR10-S
F/S (Factory Sealed) – Equipment is sealed with original manufacturer tape and is in the original box. The original factory label that contains the part number(s) and serial number (s) is legible.
NOB (New Opened Box) – Equipment is no longer sealed from the factory, but is in its original packaging. The original factory label that contains the part number(s) and serial number(s) is legible. All components and accessories are included in the package.
NEW – Equipment has never been used in production. However, the equipment is missing the original box and/or accessories; the factory label is not legible; or a combination of.
USED/REFURBISHED – Equipment has been used in a production environment. Item may show signs of use, including light scratches or other minor cosmetic imperfections that do not affect functionality.
Up for sale is a 12810-SFC. This card is tested and in perfect working condition.
*IOS / module revision in console below may vary on each piece unless specified above or in title*
NAME: ‘slot 22’, DESCR: ‘Switch Fabric Card(10) OC-768’ PID: 12810-SFC , VID: V01, SN: SAD120902J3 Router#show diag SLOT 22 (SFC 4 ): Switch Fabric Card(10) OC-768 MAIN: type 108, 800-20398-02 rev C0 Deviation: 0 HW config: 0x00 SW key: 00-00-00 PCA: 73-9616-01 rev A0 ver 1 Design Release 1.0 S/N SAD120902J3 MBUS: Embedded Agent Test hist: 0x00 RMA#: 00-00-00 RMA hist: 0x00 DIAG: Test count: 0x00000000 Test results: 0x00000000 FRU: Linecard/Module: 12810-SFC= MBUS Agent Software version 2.72 (RAM) (ROM version is 3.53) Primary clock is CSC 1 Slot 22: Card-type(108) = Switch Fabric Card(10) OC-768, Subtype(0) = None MBUS FAIL LED LAST 0000 PUT 0x003E28EC GET 0x00000000 MBUS OK LED LAST 0000 PUT 0x003E2880 GET 0x00000000 Slot 22: Card-type(108) = Switch Fabric Card(10) OC-768, Subtype(0) = None Inlet temp sensor: Scanning is ENABLED SHUT NA 70 CRIT NA 60 WARN NA 55 STATUS OK RAW 41 ACTUAL 410 M/S/G 0 0 0x003E601C Hotpoint temp sensor: Scanning is ENABLED SHUT NA 87 CRIT NA 82 WARN NA 77 STATUS OK RAW 64 ACTUAL 645 M/S/G 0 0 0x003E5FF4 MBUS 5V supply: Scanning is ENABLED SHUT 4700 5700 CRIT 4800 5600 WARN 4900 5500 STATUS OK RAW 638 ACTUAL 5104 M/S/G 0 0 0x003E3F80 Card 1.8v supply: Scanning is ENABLED SHUT NA NA CRIT 1674 1926 WARN 1710 1890 STATUS OK RAW 456 ACTUAL 1824 M/S/G 0 0 0x003E4B2C Card 1.35v supply: Scanning is ENABLED SHUT NA NA CRIT 1255 1444 WARN 1282 1417 STATUS OK RAW 344 ACTUAL 1376 M/S/G 0 0 0x003E4A84 Card 1.5v supply: Scanning is ENABLED SHUT NA NA CRIT 1467 1621 WARN 1498 1590 STATUS OK RAW 390 ACTUAL 1560 M/S/G 0 0 0x003E4A30 Card 2.5v supply: Scanning is ENABLED SHUT NA NA CRIT 2325 2675 WARN 2375 2625 STATUS OK RAW 629 ACTUAL 2516 M/S/G 0 0 0x003E49DC Card 5v supply: Scanning is ENABLED SHUT NA NA CRIT 4600 5400 WARN 4700 5300 STATUS OK RAW 625 ACTUAL 5000 M/S/G 0 0 0x003E4988 Card 3.3v supply: Scanning is ENABLED SHUT NA NA CRIT 2900 3600 WARN 2950 3500 STATUS OK RAW 830 ACTUAL 3320 M/S/G 0 0 0x003E40E0 Router#show facility-alarm environment active Environment Alarming Status +——+———-+———-+ | Slot | Alarming | Template | +——+———-+———-+ | 0 | inactive | – | | 16 | inactive | – | | 17 | inactive | – | | 18 | inactive | – | | 19 | inactive | – | | 20 | inactive | – | | 21 | inactive | – | | 22 | inactive | – | | 24 | inactive | – | | 25 | inactive | – | | 29 | inactive | – | +——+———-+———-+ Router#show hardware Cisco Internetwork Operating System Software IOS ™ GS Software (C12KPRP-K4P-M), Version 12.0(33)S11, RELEASE SOFTWARE (fc2) Technical Support: https://www.cisco.com/techsupport Copyright (c) 1986-2013 by cisco Systems, Inc. Compiled Fri 15-Mar-13 06:03 by sdcunha ROM: System Bootstrap, Version 12.0(20100127:230559) [skumarss-33s 1.24] RELEASE SOFTWARE BOOTLDR: GS Software (C12KPRP-K4P-M), Version 12.0(33)S11, RELEASE SOFTWARE (fc2) Router uptime is 32 minutes Uptime for this control processor is 32 minutes System returned to ROM by reload at 23:23:36 UTC Fri Dec 5 2014 System image file is ‘disk1:c12kprp-k4p-mz.120-33.S11.bin’ cisco 12810/PRP (MPC7457) processor (revision 0x00) with 1048576K bytes of memory. MPC7457 CPU at 1263Mhz, Rev 1.2, 512KB L2, 2048KB L3 Cache Last reset from power-on Channelized E1, Version 1.0. 1 Route Processor Card 2 Clock Scheduler Cards 5 Switch Fabric Cards 2 T1/E1 BITS controllers 3 Ethernet/IEEE 802.3 interface(s) 2043K bytes of non-volatile configuration memory. 4107600K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 250368K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes). 65536K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2102
Dedicated Networks stands by all of the products we sell. All equipment goes through a thorough testing and refurbishment process before it reaches your destination. If an item hasn’t met your expectations, you can send it back. Unlike most businesses, we also guarantee the product selection advice offered by our staff.
See Full Warranty
If an item you’ve purchased hasn’t met your expectations or turns out to be unsuitable, you can send it back. Simply return the item for exchange, refund, repair, or credit.
See Full Return Policy
Any equipment you purchase from Dedicated Networks comes with a 1-year satisfaction guarantee. If there is anything wrong with the equipment you purchase from us or you are not 100% satisfied just give us a call or contact your designated Sales Representative directly.
See Full Return Policy